Crystal-clear cast acrylic display case with UV protection. Fits most small to medium LEGO sets up to 35cm wide. Dust-proof seal with removable lid for easy access.
Ships in 2–3 business days · 30×20×20 cm · Cast Acrylic 3mm
$51.00 away from free shipping
Image coming soon
Perfect for Ideas & Creator sets
Report 2024(X)07065, issued against the national standard for cast industrial acrylic sheet by a laboratory accredited under the ILAC mutual recognition arrangement. Twelve properties measured. Where a figure is not in that report, it is not on this page.

Polymerised between glass rather than pushed through a die, and tested against the cast-sheet standard rather than the general one. Cast panels carry almost no internal stress — no fine white crazing after a year on a warm shelf.


Total luminous transmittance, measured. The standard asks for 91 and most clear acrylic lands near 92 — about four per cent is lost to surface reflection no matter what, so the room to be better than average is narrow. This sits at the top of it.


Three millimetres on the small cases, four in the middle, five on the largest. A panel bows more the further it has to reach, so one thickness across a range either wastes material at the bottom or gives at the top.


Acrylic does not yellow with age — the cheap display boxes that do are polystyrene, which breaks down under light within months. Softening point measured at 109°C, so a sunlit shelf is nowhere near enough to move it.

Panels go to an independent laboratory accredited under the ILAC mutual recognition arrangement, whose results are accepted across roughly a hundred economies. Tensile strength came back at 73.8 MPa against a 70 requirement, impact at 19 kJ/m² against 17.
The bar marks what the standard asks for. Everything to the right of it is what the sheet actually did. Five more properties were recorded without a threshold to meet.
Tested against GB/T 7134 for cast industrial acrylic sheet, at a laboratory accredited under the ILAC mutual recognition arrangement — its results are accepted across roughly a hundred economies, this one included.
A panel bows under its own weight, and the bow grows far faster than the span does — double the reach and it sags roughly sixteen times as much. One thickness across a whole range either wastes material on the small cases or gives way on the large ones.
Drawn to explain the reasoning, not to scale. The thicknesses are the ones we build to.
Designed to fit your collection perfectly. Ships flat-packed with all hardware included — assembly in minutes.
We replace it, and it costs you nothing. Send a photo within 30 days of delivery and a new case ships — no return shipping, no fee, and you do not need to send the damaged one back. Acrylic travels with protective film on both faces and we open every case here before it goes out, but panels get handled and film gets pulled. When it happens it is our problem to fix, not yours to live with.
Thirty days from delivery, and the return is free — tell us and we send a prepaid label, then refund the full price with no restocking fee and no deduction for shipping either way. You do not have to tell us why. Building it does not cost you the return either: these ship flat-packed and are meant to be assembled, so we only ask that the panels come back unmarked and packed well enough to survive the trip.
Acrylic is softer than glass, so yes, it can — the same trade that makes it clearer and far less likely to shatter. Dust it with a microfibre cloth rather than paper towel, and skip ammonia cleaners: glass cleaner is the usual culprit behind a hazed case.
No. Acrylic is UV-stable by nature — the display boxes that go yellow within months are polystyrene, a cheaper plastic that breaks down under light. Ours is cast acrylic, measured at 94.6% light transmittance and a 109°C softening point, so a sunlit shelf is nowhere near enough to change it.
Partly, and we would rather be exact about it: plain acrylic blocks most UVB but only around a third of UVA, so it slows sun-fading rather than stopping it. If a set is going somewhere with hours of direct afternoon sun, no case of any material saves it — move the shelf.
Cast. It is polymerised between glass rather than pushed through a die, which costs more per sheet and is why the panels carry almost no internal stress — the fine white crazing that shows up on cheaper cases after a year on a warm shelf. Our sheet is tested against GB/T 7134, the standard written for cast sheet.
Cut for your set, not adapted to it. Ships flat-packed with every fitting included.

Skiing is seasonal — but our team isn’t. PVD was created by the same coaches and crew behind PTO Ski & Snowboard to keep our local team together year-round. We’re real people in Oregon who love the outdoors, love skiing, and yes — love toys too. We bring the same care and service to every display case as we do to every ski fitting.
Your PVD store credit is also redeemable at PTO Ski & Snowboard.